background image

7

3.

 

Remove the grease drawer, empty and wash thoroughly with soap & water. Replace.

CLEANING INSTRUCTIONS (FOR HEAVY BUILD UP)

(After using cleaners & grease cutter, re-season the griddle)

Apply to a warm griddle for best results.

1.

 

Using a traditional 64mm-76mm (2 ½”-3”) scraper or spatula scrape the griddle surface (to
remove  food  particles  and  oil  residues)  towards  the  grease  trough  using  even  back  to  front
strokes. Deposit debris into the chute.

2.

 

Apply  griddle  cleaner  evenly  over  the  griddle  surface  and  let  sit  as  directed.  Follow  the
procedures on the label of the specific cleaning product.

3.

 

Using a traditional scraper or spatula, slosh around the griddle cleaner to remove the build up.

4.

 

Scrape the griddle surface towards the grease trough using even back to front strokes. Repeat
step 2 if necessary.

5.

 

Using  a  mild  detergent,  clean  the  surface  and  rinse  thoroughly  with  a  water  and  vinegar
solution. Dry griddle.

6.

 

Using a clean cloth rub a thin and even layer of oil into the griddle surface.

7.

 

Re-season the griddle 

as detailed above. The griddle is now ready for use.

GRIDDLE DO’S & DON’TS

DO’S

1.

 

Season  the  griddle.  This  will  prevent  foods  from  sticking  and  make  it  easier  to  keep  the
surface clean.

2.

 

Keep  the  surface  clean.  Scraping  the  surface  throughout  production  to  clear  foods  and  oils
prevents build up and will make it easier to keep the surface clean.

3.

 

Turn  the  temperature  down  during  slow  periods.  Reducing  the  temperature  or  turning
sections off during slow periods will conserve energy and prevent the plate from overheating.

DON’TS

1.

 

Do  not  use  salt  to  clean  the  griddle  surface.  Salt  is  corrosive  and  can  cause  pitting  of  the
griddle.

2.

 

Do  not  allow  metal  utensils  (Spatula,  scraper,  etc.)  to  nick  and/or  dent  the  surface  of  the
griddle. The edges of these utensils are sharp and will create divots that oil can collect in and
caramelize which will cause sticking.

Содержание ECG













Отзывы: