Garland CHIPPER 105 E, Инструкция по эксплуатации, Страница: 33 / 112

English
32/112
English
33/112
9. TROUBLESHOOTING
Depending on the symptoms of the machine we can detect the likely cause and solve the problem.
In any other case, take the machine to your nearest after sales service.
Problem Cause Action
The engine stops when started
Plug or connector in a bad state. Connect to mains.
Plug or connector in a bad state.
Try another plug. If the machine does
not start, take to nearest service agent.
Cable damaged.
Take the machine to after sales service.
Never repair cable using tape.
Switch damaged. Take the machine to after sales service.
Security switch activated. Press the restart button.
Machine works sporadically
Cable extension faulty.
Internal cabling faulty.
Switch faulty.
Check the cable extension and
substitute if necessary. Stop the
machine, disconnect the machine and
check the hopper and blades.
Performance of the machine is
inadequate
Blunt blade.
Hopper, ejection mouthpiece or blades
blocked.
Substitute blades.
Stop the machine, unplug and clean the
shredding conduct and the blades.
Blade does not turn
Blade blocked by strange element.
Screws of the blade loose.
Stop the machine, unplug and unblock
the blades.
Tighten the blades following steps in
blade maintenance.
Excessive vibrations or noise
Blades loose.
Blades damaged.
Strange and hard elements blocking
the blades.
Tighten blades, Change blades.
Clean entry conduct and blades.