Gared Hoopmaster LT, Инструкции по установке, эксплуатации и обслуживанию, Страница: 9 / 16

Hoopmaster LT Portable Backstop
-8-
4) To set the unit the floor pads must be locked in place. Stepping on them can do
this. The pads are found at all four corners. Leveling can be done with the
adjustment screw.
ADJUSTMENT SCREW SETTING FLOOR PADS
5)
Using masking tape and pencil, Mark the location of the center of the court 4’-0”
from the court baseline (refer to figure 5). From this center mark, establish a
mark 3’-0” to the left and another mark 3’-0” to the right. These marks will be
used to align the face of bank to the court.
Figure 5
6) Push the unit to the playing location on the court. Raise the boom to
the 10’-0” playing position. Insert the safety pin into the sliding latch
bar at the rear of the unit. Check the goal height at the base of the
goal.