All
Pro Jam Adjustable Basketball System
18
Install Height Adjusting Decal
1.
Crank Goal to the 10’-0” position. Crank counter-
clockwise to raise goal. Measure from the playing
surface to the top of the goal ring. Using a piece of
tape, mark the location of the lower edge of the rain
shield.
2.
Crank the Goal to the minimum height
so that the Lifting Arm rests on the stop.
Crank clockwise to lower.
3.
Apply Height Adjusting Decal, #24, so
that the 10’-0” line aligns with mark
from step #1.
4.
Adjust Goal to the desired playing height by cranking up or
down until the desired height mark aligns with the lower
edged of the Rain Sleeve.
Align with 10’
mark on tape.
