DETAIL A
A
TM
GARED
PERFORMANCE
SPORTS SYSTEMS
Gared Holdings, LLC
9200 E. 146th St.
Noblesville, IN 46060
FILE LOC.
SHT. NO.
PART NO.
REV
ADJUSTABLE JUNIOR JAMMER
6
OF 6
JJ5A
B
Q:\Inventor Files\_xxxx-xx-xx\JJ5 MODEL
DATE
3/14/2019
Installation and Assembly Instructions
Hand knobs must safely secure the upper frame to the existing goal. The point of the
hand knob MUST contact the goal beneath the welded support flange or goal rim in
order to properly lock in place.
Failure to secure hand knobs in position could allow the unit to fall causing damage to
equipment and/or serious injury to personnel.
8
15
STEP FOUR
With the help of an assistant, place assembled unit onto permanent goal hoop. Ensure lower frame connector (5)
is engaged with upper frame connector (6) as shown in illustration, insert and tighten hand knob M12 x 50mm (7).
Secure unit into place as shown in detail “A” and fully tighten hand knob M12x50mm (7)
and secure with jam nut M12 (15) on both sides.
EXISTING BACKBOARD
AND GOAL
EXISTING BACKBOARD
AND GOAL
9 FT
8 1/2 FT
8 FT
7 1/2 FT
7 FT
USE LOWER ANCHOR
POSITION FOR 9 FT
THROUGH 7 1/2 FT HEIGHT
USE UPPER ANCHOR
POSITION FOR 7 FT HEIGHT
ADJUST BRACE TO
PLUMB BACKBOARD AND
LEVEL GOAL
SEE
WARNING
SHEET 5
