Doc 151751465
Gared Holdings, LLC
9200 East 146
th
Street, Suite A
Noblesville, Indiana 46060
800-325-2682
MODEL NUMBER
151651461
INSTALLATION INSTRUCTION CONT:
13.
USING THE TOP OF THE FLOOR PLATE AS A GUIDE, CENTER THE 5/32” DRILL BIT IN EACH HOLE AND DRILL FOUR (4)
HOLES IN THE WOOD FLOOR 1-5/8” DEEP FOR THE WOOD SCREWS AS SHOWN ABOVE. INSTALL THE WOOD SCREWS,
MAKING SURE THAT THEY ARE STRAIGHT AND WELL SEATED IN THE COUNTERSINK OF THE TOP PLATE.
14.
ALLOW TO CURE FOR AT LEAST 15 MINUTES. AFTER THIS TIME THE CEMENT IS INITIALLY SET. REMOVE THE CAP
SCREW FROM THE TOP PLATE
15.
ALLOW 12 HOURS TO FULLY CURE. AFTER 12 HOURS, THE APPARATUS MAY BE SET UP AND USED WITH FLOOR
PLATE
16.
WHEN INSTALLING THE APPARATUS TO THE FLOOR PLATE, INSERT THE EYE SCREWS FINGER TIGHT ONLY. NO
TOOLS SHOULD BE REQUIRED FOR THIS OPERATION. AFTER THE EYE SCREW HAS BEEN TIGHTENED FINGER TIGHT,
LOOSEN ONLY ENOUGH TO ALLOW PROPER ALIGNMENT BETWEEN APPARATUS ATTACHING BRACKET(S) AND
EYEBOLT.
USE OF YOUR “B” PLATE
1.
THIS FLOOR PLATE IS INTENDED FOR USE IN FLOORS WITH A LAYER OF WOOD INSTALLED DIRECTLY OVER
CONCRETE. IT IS NOT INTENDED FOR USE WITH FLOATING FLOORS OR CONCRETE ONLY FLOORS. IF THERE IS ANY
QUESTION ABOUT THE APPROPRIATE FLOOR PLATE FOR YOUR FLOOR SURFACE, CONTACT GARED FOR ASSISTANCE
BEFORE INSTALLING.
2.
CLEAN AND INSPECT FLOOR PLATES REGULARLY. ENSURE THAT THREADS ARE ENGAGING PROPERLY AND THERE IS
NO BREAKDOWN OF CEMENT. PROPERLY INSTALLED THIS FLOOR PLATE IS DESIGNED TO WITHSTAND ANY LOAD
APPLIED BY THE APPARATUS.
3.
IF THERE IS ANY DOUBT AS TO THE INTEGRITY OF THE FLOOR PLATE,
DO NOT USE IT
. CONTACT A PROFESSIONAL
INSTALLER OR GARED FOR EVALUATION.
