21
Cleaning baseboard heat or under refrigerator with the
Lint Brush
Baseboard Heat:
Works great to remove the dust buildup on the
fi
ns inside your
baseboard heat. Simply run the brush over the
fi
ns while
the
brush clockwise. Use a vacuum to clean the brush as you go.
Be careful not to damage the
fi
ns.
Under the Refrigerator:
When
to one or more FlexRods, the lint brush also works great for
cleaning out the debris from under the refrigerator or any hard to reach
areas around your home.
Use Blockage Removal Tool for clearing
er Downspouts”
a)
h the
Blockage Removal Tool
to a rod as
earlier
b) Feed the
fi
rst rod with the tool up into the
of the downspout.
c)
to add rods un l you reach the blockage.
d) Use your hand or the drill to rotate
“Clockwise”
into the blockage
it is cleared.
The tool can also be used from the top as well.
What to do if the rods disconnect in the vent
If you accidently reverse the drill or rotate the rods “counter clockwise”
by hand, the rods may disconnect leaving some of the rods and the
brush inside the vent.
Although this rarely happens, we have designed a “Retrieval Tool” to
grab the brush and pull it out. It
aches to your remaining rods and is
used by hand without the drill.
To obtain this tool, please contact us at:
[email protected]
Phone: 203.985.0208
