background image

WARNING

 

For your own safety, please read this manual before attempting to operate your 
new unit. Failure to follow these instructions can result in serious personal injury. 
Spend a few moments to familiarize yourself with your mower before each use. 
Keep this manual in a safe place, so that the information is available anytime. If 
you give the equipment to any other person, hand over these operating 
instructions and safety regulations as well. 
 

Intended use 

 
The equipment may only be used for the purpose it is designed for. Any other use is deemed to be a case of 
misuse. The operator, and not the manufacturer, will be liable for any resulting damage or injuries of any kind. 
 
The petrol lawn mower is intended for private use, i.e. for use in home and gardening environments.   
Private use of the lawn mower refers an annual operating time up to of 50 hours, during which time the machine 
is primarily used to maintain small-scale, residential lawns and home/ hobby gardens. Public facilities, sportis 
grounds and agricultural or forestry applications are excluded. 
 
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. 
Our warranty will be void if the machine is used in a commercial, trade or industrial business or for equivalent 
purposes. 
The operating instructions as supplied by the manufacturer must be kept and referred to in order to ensure that 
the lawn mower is properly used and mainteed. The instructions contain valuable information on operating, 
maintenance and servicing conditions. 
 

Important!

 Due to the high risk of body injury to the user, the lawn mower may not be used to trim bushes, 

hedges or shrubs, to cut scaling vegetation, planted roofs or balcony-grown grass, to clean (suck up) dirt and 
debris off walkways, or to chop up tree or hedge clippings. Moreover, the lawn mower may not be used as a 
power cultivator to level out elevated soil pieces such as molehills. 
For safety reasons, the lawn mower may not be used as a drive unit for other work tools or toolkits of any kind. 
 

 

Содержание DYM162601































Отзывы: