Gardner Denver Welch LVS 105 T 10 ef+, Руководство по эксплуатации

Страница: 53 / 64

Elimination of operating faults
Operation Manual LVS 105 T
– 10 ef
+ 53
Type of error Cause Measure
Au-
tho-
rized
It is not possible to
set the parameter Firmware error Upload the current firmware
1
Faulty electronics Repair the device
3
Vacuum controller
cannot be set or
programmed Faulty electron-
ics/display Repair or replace
3
Incorrect language System setting set
incorrectly Set the language: first option under
system settings: see section
6.2.6
System settings
1
Reset the device; see section 6.2.6
System settings; 10
– Reset to fac-
tory settings
1
Access locked
ADMIN
or
USER
ADMIN or possibly
USER password is
set
Have unlocked by authorized person;
see sections
6.2.6 System settings
and 6.3.1 Access control
(1), 2
No access to vac-
uum controller via
PC No connection to PC Check cable connection of the data
connection and check connection
status under
System setting

Net-
work

Status "connected"
1
IP addressing not
correct Check the IP address; if necessary,
set DHCP to "dynamic", see section
6.2.6 System settings; 7
– Network
1
Incorrect actual
value of pressure Wrong calibration Recalibrate the pressure sensor;
see section 6.2.6 System settings ; 3
– Control systems/calibration
1
Reset the device; see section 6.2.6
System settings ; 10
– Reset to fac-
tory settings
1
REPAIR
►
Repairs may only be performed by specialists or by the manufacturer;
see section 8 Maintenance.