![background image](http://html1.mh-extra.com/html/gardner-denver/thomas-sk927/thomas-sk927_quick-start-manual_3879524001.webp)
MODEL SK927
COMPRESSOR SERVICE KIT
CAUTION:
Improper assembly or use of damaged parts may lead to
premature failure. To avoid frequent repairs follow these assembly
procedures.
NOTE:
Before you begin read these instructions thoroughly. Assemble the
necessary tools. You will need a flat tip and phillips head screw driver as well as a
T-20 and T-25 Torx driver for a torque wrench.
WARNING:
Unplug the compressor before beginning disassembly.
ALWAYS NOTE POSITION AND ORIENTATION OF PARTS AS REMOVED
TO ASSURE CORRECT POSITIONING WHEN REASSEMBLING.
Part No.642650B 02/07 ©2007 Printed in U.S.A
All Rights Reserved
For service to 917/927 Series Compressors
FILTER REPLACEMENT
1. Remove filter cap.
2. Remove old filter and discard.
3. Wipe inside of filter body and cap with a clean soft cloth.
4. Place new filter inside of filter body.
5. Replace cap.
Filter Cap
Filter
Filter Body
621102 Valve Flapper
Intake & Exhaust (2)
633560 Gasket O-Ring
625223 Valve Plate
Screws (5)
625540 Diaphragm
Hold Down Screws (4)
625444 Head Screws
(6)
608212 Diaphragm
625160 Valve Flapper
Screws (2)
641034 Filter
617045 Valve Keeper
Strip (2)
3524 Washington Avenue, Sheboygan, WI 53081 USA
(920) 452-4891 www.gd-thomas.com