![background image](http://html1.mh-extra.com/html/gardner-denver/emco-wheaton-e2022/emco-wheaton-e2022_installation-operation-and-maintenance-manual_563883009.webp)
Instruction Manual
Top & Bottom Loading Arms
E2110, E2112, E2022, E2025
E2033, E2304, E2573, E2123,
E2313, E2121
- 7 -
For loading arms not supplied with a finish coating, the customer is responsible
for painting the arm to provide corrosion protection.
Protect all hoses and cables against rodents. If the arm is to be stored for an
extended period, protect with a suitable preservative. Please contact EMCO
WHEATON for more information.
6 Installation
6.1 Installation of the Loading Arm
(E2025 & E2304 shown)
Attach suitable hoisting gear to the loading arm for lifting the loading arm and to
avoid damaging the loading arm.
Danger
During installation of the loading
arm it could turn or fall down
Keep a safe distance from the
loading arm while hoisting
Loosen the transportation locks and remove all packing material. Lift the loading
arm and remove the supporting frames. Mount the stand post or the wall bracket,
if supplied.
Pay close attention to a proper vertical alignment. Lift the loading arm until
mounting brackets align properly. The installation position of the loading arm is
horizontal (see drawing for correct inlet position). Bolt the swivel joint bracket to