![background image](http://html1.mh-extra.com/html/gardner-denver/elmo-rietschle-c-vlr-100/elmo-rietschle-c-vlr-100_manual_563902025.webp)
25
www.gd-elmorietschle.com
© Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
|
Maintenance and repair
s
4
q
k
m
n
2
m
s
5
q
n
1
v
k
7.2.3 Clutch
The clutch sprocket (Fig. 9/k, 10/k)) is subject to
wear and must be checked regularly (at least once a
year).
CAuTION
Defective clutch sprocket
Defective sprockets may lead to the rotor shaft
breaking.
To check the clutch switch the motor (Fig. 9/m,
Fig. 10/m) off and ensure that it cannot be switched
on again.
C-VLR 60
Undo the screws (Fig. 9/s
4
) on the housing flange
1
). Remove the motor axially with the half of
the clutch on the motor side (Fig. 9/q) and suspend
with the lifting device. If the sprocket (Fig. 9/k) is
damaged or worn, then replace it.
C-VLR 100 - 251
Undo the screws (Fig. 10/s
5
) on the motor flange.
Remove motor and the clutch half (Fig. 10/q) from
the valve housing (Fig. 10/n
2
) axially and suspend
with a lifting device. If the sprocket (Fig. 10/k) is
damaged or worn, then replace it. The fan (Fig. 10/v)
should also be checked for damage from time to
time and replaced if necessary.
NotiCe
Frequent starting up and high ambient tem-
perature
The service life of the sprocket (Fig. 9/k, Fig. 10/k)
is reduced as a result of this.
Re-assemble in reverse order.
Fig. 9
Coupling C-VLR 60
k
Clutch sprocket
m
Motor
n
1
Housing
q
Clutch half on the motor side
s
4
Screws
Fig. 10 Coupling C-VLR 100 - 251
k
Clutch sprocket
m
Motor
n
2
Fan housing
q
Clutch half on the motor side
s
5
Screws
v
Fan
Содержание Elmo Rietschle C-VLR 100
Страница 31: ......