Page
6
GARDTEC
800 Series
User Manual
Unsetting The System
1)
Enter the premises via the authorised entry route
(the broken entry tone will sound),
proceed to the keypad.
2)
At the keypad enter a valid code, the display
will show:-
(Area information may be shown on 840)
3)
The system is now unset.
Note:
If an Area Code (840 Only) has been entered only the area associated
with that code will be unset.
Note:
If a Cleaner Code has been entered only the cleaner area will be unset.
Part Setting The System
(using Master & Main type codes)
1)
With the display showing:-
2)
Enter a Master or Main type code, the
display will show for example:-
(User Name on 816 & 840 Only)
3)
Press 1, 2 or 3 (for Part 1, 2 or 3), the
display will show for example:-
(1 2 3 may not show on Gardtec
800 & 816)
Note:
(840 Only) If a Global code (Master or Main) has been
used all areas that are being set will be
Part 1 set.
Note:
(840 Only) If an Area Main code has been used only
Part 1 set for that associated area will occur.
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01
< < < < UN-SET > > > >
01 JAN 18 : 58 : 01
Do you want to . .
Set , STUART ?
EXIT Now! 1 2 3 C
Part 1
15
combi.qxd 12/01/99 09:00 Page 6
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com