Introduction
This Quick Start Guide is intended to help end users who are new to security
systems in the day to day use of the system. We recommend that this guide is used
in conjunction with the end user manual that was supplied with the control panel.
Your Gardtec 350 Control Panel will have been fully programmed by your installation
engineer to suit your needs. Should your requirements change with time the
installation company who originally installed your system are the people best suited
to advise you on your new requirements.
Display of the system status is given via eight LEDs (Light Emitting Diodes). When
using the Gardtec 350 in its normal mode the bold legend to the left of the LEDs is
used (see below).
Bold legend for normal use
User programming mode legend
System Status LEDs
The legend to the right of the LEDs is used when in user programming mode, this is
dealt with later in this guide.
Caring for your System
Your security system needs to be serviced on a regular basis to ensure its reliability
and effectiveness. Your installation company will advise you on suitable service
periods for your system.
Day to Day care of your system is a wipe over with a slightly moist cloth.
Under no circumstances should you use abrasives or detergent on any part of
the system.
Damage to any control equipment, detectors or sounders should be reported to your
installation company as soon as possible.
