25
adjustable web belt, or the tripod socket.
Using the adjustable strap
: To use the strap on the camera
,
push one end of the strap through the two brackets on the back
of the camera
.
Thread the end of the strap through the buckle.
Fasten the strap securely around the tree trunk by pulling the
end of the strap firmly so there is no slack left (
Figure 17
).
Using the tripod socket
: The camera is equipped with a socket
at the bottom end to enable mounting on a tripod or other
mounting accessories with a standard
UNC 1/4-20
thread screw
(not included)
.
Figure 17: Mounting the Camera
10.2. Sensing Angle and Distance Test
To test whether the camera can effectively monitor the area
you choose, this test is recommended to check the sensing
angle and monitoring distance of the camera
.
To perform the
test:
Switch the camera to the
ON
mode.
Press
MENU
button, go to "
Motion Test
". The camera will
count down a max 60-second delay and be ready to capture
motion.
(Note: The delay time may be less than 60 seconds,
