
16
camera
.
Push one end of the strap through the two brackets on
the back of the camera
.
Thread the end of the strap through the
buckle. Fasten the strap securely around the tree trunk by
pulling the end of the strap firmly so there is no slack left
(
Figure 8
).
Note: it is not possible to use a cable lock (in the
upper part of the bracket) and the strap at the same time.
Using the tripod socket
: The camera is equipped with a socket
at the bottom end to enable mounting on a tripod or other
mounting accessories with a standard
UNC 1/4-20
thread screw
(user supplied)
.
Figure 8: Mounting the Camera
9.2.
SENSING ANGLE AND DISTANCE TEST
To test whether the camera
can effectively monitor the area you
choose, this test is recommended to check the sensing angle and
monitoring distance of the camera
.
To perform the test:
Switch the camera
to the
SET
mode.
Select “Motion Test” in the Menu. The camera will
countdown a max 30-second delay and be ready to capture
motions.
(Note: The delay time may be less than 30 seconds,
depending on the actual time of the motion sensor to be
activated. The delay time is 30 seconds minus the power-on
time.)
Close the camera door.
Make movements in front of the camera at several positions
Содержание A3
Страница 1: ...INSTRUCTION MANUAL MODEL A3 V1 2...