Gardeo GTDAM38BAG Скачать руководство пользователя страница 13

 

13

GB 

 

 

 

When using the equipment, a few 

safety precautions must be 

observed to avoid injuries and 

damage. Please read the complete 

operating instructions and safety 

regulations with due care. Keep this 

manual in a safe place so that the 

information is available at all times. 

If you give the equipment to any 

other person, hand over these 

operating instructions and safety 

regulations as well. We cannot 

accept any liability for damage or 

accidents which arise due to a 

failure to follow these instructions 

and the safety instructions. 

 

Note 

 
1. Before you operate this hand mower, thoroughly 
read through the following safety regulations as 
well as the operating instructions. 
 
2. Never allow children or other persons who are not 
familiar with the operating instructions to use the 
mower. Contact your local governmental agency 
for information regarding minimum age 
requirements for the user. 
 
3. Never mow in the direct vicinity of persons - 
especially children - or animals. 
 
4. Always keep in mind that the operator or user of 
the equipment is responsible for accidents 
involving other persons and/or their property. 
 
5. Always wear sturdy, non-slip footwear and long 
trousers when mowing. Never mow barefoot or in 
sandals. 
 
6. Check the grounds on which the machine will be 
used and remove all objects that could be caught 
up and violently flung out of the chute. 
 
7. Prior to using the mower, visually inspect it to 
ensure that the cutting tools, mounting bolts and 
the entire cutting apparatus are in good working 
order (i.e. not worn out or damaged). 
 
8. Only mow in broad daylight or in well-lit 
conditions. 
 
9. Always maintain good footing on inclines. 
 
10. Operate the machine at a walking pace only. 
 
11. Always mow across hills i.e. never straight up or 
straight down. 
 
12. Always be extra careful when turning the mower 
around and when pulling it towards you. 
 

13. Do not mow on overly steep inclines. 
 
14. Familiarize yourself with the operator controls 
and proper operation of the equipment. 
 
15. Improper operation of the hand mower can lead 
to serious injuries. 
 
16. Note that the cutting unit rotates at high speed 
and with great centrifugal force, which can lead to 
serious injury if direct contact is made. Always 
ensure that a safe distance (provided by the 
length of the long handles) is maintained between 
the user and the cutting unit. 
 
17. Never move your hands or feet toward or under 
any rotating parts. 
 
18. This equipment is not designed to be used by 
people (including children) with limited physical, 
sensory or mental capacities or those with no 
experience and/or knowledge unless they are 
supervised by a person who is responsible for 
their safety or they have received instructions 
from such a person in how to use the equipment 
safely. Children must always be supervised in 
order to ensure that they do not play with the 
equipment.

 

 

 

Read all safety regulations and 

instructions. 

Any failures made in following the 

safety regulations and instructions may 

result in an electric shock, fire and/or 

serious injury. 

Keep all safety regulations and 

instructions in a safe place for future 

use. 

 
 

Layout 

 

1. Push bar 
2. Mowing spindle 
3. Wheel 
4. Housing 
5. Guide roller 
6. Grass basket 
7. Holding belt 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание GTDAM38BAG























Отзывы: