Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Check for obvious defects such as loose, dislodged
or damaged blade, loose fixings and worn or
damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
If the machine should happen to fail despite the care
taken in manufacturing and testing, repair should be
carried out by an authorized customer service agent
for GARDEO products.
BLADE MAINTENANCE
Always clean the cutting blades after operation and
lubricate with GARDEO Maintenance spray. During
longer cutting jobs, we recommend periodically
lubricating the cutting blade with GARDEO
Maintenance spray.
Visually check the condition of the cutting edges of
the cutting blade.
Ensure that the blade is covered with the blade
guard supplied when not in use.
Necessary repair works or maintenance works
have to be carried out before the usage of the
machine.
Changing the blade
Risk of injury to the fingers and
hands when carrying
out work on the cutting tool.
The cutting tools are subject to heavy wearing.
Immediately exchange cutting tools when the
faultless function is not guaranteed.
Removing
If you have used the product with assembled
telescopic handle press the unlocking knob (21) and
pull the telescopic handle out of its holder (16).
> Loosen the clamping screw (15) and remove the
wheel set.
> Lift the locking tab (a) “2” and slide away the cover
(10) in arrow direction “1”.
> Remove the cutting tool.
> Clean the gear unit and lubricate the gear wheels
if required (acid-free grease such as petroleum
jelly).
> Place the cover. The catching tabs must be
aligned with the marks.
> Slide the cover (10) until it engages with a click.
