GARDEO PRO 5411074197797, Оригинальное руководство пользователя

Страница: 77 / 90

77

Inspect the filter and foam element, and replace it if damaged.

Clean the filter by tapping it several times on a hard surface to remove dirt, or blow
compressed air through the air filter from the inside. Never try to brush off dirt;
brushing will force dirt into the fibers.

Wipe dirt from the inside of the air cleaner base and cover, using a moist rag. Be
careful to prevent dirt from entering the air duct that leads to the carburetor.

Reinstall the filter and cover.
Spark Plug Service
For good performance, the spark plug must be properly gapped and free of deposits.

Disconnect the spark plug cap and remove any dirt from around the spark plug area.

Remove the spark plug with a spark plug wrench.

Inspect the spark plug. Replace it if the electrodes are worn, or if the insulator is
cracked or chipped.

Measure the spark plug electrode gap with a suitable gauge. The gap should be
0.028 ~ 0.031 in (0.7 ~ 0.8mm). Correct the gap, if
necessary, by carefully bending the side electrode with a
suitable tool.

Install the spark plug carefully, by hand, to avoid
cross-threading.

Install the spark plug cap on the spark plug.