GardenWize GW367, Руководство пользователя

Страница: 6 / 12

3. Install the pole onto the lower support brackets using the supplied M6 bolts and nuts. Once installed, fully
tighten all the bolts. See figure 3.
4. Then, with the cylinder casing, slide it over the assembled bracket and pole as shown in Figure 4.
5. Then, get the head assembly and attach the three reflector spacers and washers at the top. Once the
spacers are in place, loosely fasten the stainless steel bolt at the bottom of the assembly. See Figure 5.
Figure 3
Figure 5
Figure 4