How It Works
This pair of dazzling solar stake lights come with a solar panel attached on the side, just
above the stake. The solar panel absorbs solar energy during the day to recharge the included
rechargeable battery. At night, the LED lights automatically illuminate, bringing charm and
personality to your garden area.
On First Use
Before using this product, we advise that you fully charge the battery by placing the solar panel
under direct sunlight for a full 24 hour period.
Assembly
1. Carefully remove the product from its packaging.
2. Assemble both solar stake lights by attaching the ground spike.
3. Then, space out the LED lights on both stake light so that it resembles a flower tree.
4. Position the solar stake in a suitable place in your garden bed and fold out the solar
panel, making sure the solar panel is getting sufficient direct sunlight.
Where to Put Solar Light
The solar panel MUST be under DIRECT SUNLIGHT in order for the battery to charge.
We highly advise to avoid positioning the solar panel where there is a lot of shade or there
is low light as this will prevent the battery from getting charged. And we also advise to not
position the light near sources of artificial light that come on at night such as street lights
as this will affect performance of light.
Other factors such as weather conditions and the number of hours of daylight will also
affect the performance as well.
Turn On and Off
The switch is located near the battery unit. To turn on, simply set to ‘ON’. To switch off,
just set to ‘OFF’.
Maintenance & Troubleshooting
1. Make sure the switch is set to the “ON” position.
2. Keep the solar panel clean.
3. If a solar product does not light up after it has been used for around 8 – 12 months,
replace the rechargeable battery as it may be weak or worn out. (Battery 1 pc “AA”
1.2v 400Mah, Ni-MH, Rechargeable).
Never use another battery with a different spec.
