10
AFTER SALES SUPPORT 1800 599 8898 [email protected] 43472-14
10
11
AFTER SALES SUPPORT 1800 599 8898 [email protected] 43472-14
5. Screw in Bottle Opener (O) with the bottle opener hole facing the
ground into Pole A (A), underneath the Shelf (F) with Utensil Rack
(M) attached to it, using two [white zinc] M6x15mm screws (T).
Lift the Pole Foot (P) up from each pole and insert a Stake (N)
through the holes at the bottoms of those poles. Place each Pole
Foot (P) back in its place covering the Stakes (N).
Place the Top Canopy (Q) over the shorter ribs of part G and insert
the ends of those ribs into the canopy pockets found underneath
the Top Canopy (Q).
Place the Main Canopy (R) over the longer ribs of parts G and H
and insert the ends of those ribs into the canopy pockets found
underneath the Main Canopy (R).
4. Insert the longer rib of the four Canopy Two Tier Ribs (G) into the
longer ends of the Main Canopy Connector (J) until they snap into
place and will not budge. Insert the shorter rib of the four Canopy
Two Tier Ribs (G) into the Top Canopy Connector (I) until they snap
into place and will not budge.
Insert two Canopy Ribs (H) into the shorter ends of the Main
Canopy Connector (J) until they snap into place and will not
budge. Place the longer ribs of the four Canopy Two Tier Ribs (G)
in between the Rib Bracers (K) that are at the tops of Pole A (A),
Pole B (B), and both Pole C (C). Insert M6x28mm screw (U) through
each Rib Bracer (K) and through each long rib of the Canopy Two
Tier Ribs (G) and tighten them down with a Nut (W).
Place the Canopy Ribs (H) in between the Rib Bracers (K) that
are at the tops of both Long Arches (D). Insert M6x28mm screw
(U) through each Rib Bracer (K) and through each long rib of the
Canopy Ribs (H) and tighten them down with a Nut (W).
G
G
G
U
W
J
I
H
R
N
Q
T
O
Assembly Instructions
Assembly Instructions
4
4
