Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 8073
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 8073
12
13
Layout
(Fig. 3)
Installation
Important
: Do not start the engine until the saw is
fully assembled.
Important
: Wear protective gloves at all times when handling
the chain.
Fit the chain bar
To ensure that the bar and the chain are supplied with oil,
USE ONLY THE ORIGINAL BAR. The oiling hole (Fig. 4/Item
A) must be kept clear of dirt and any build-up of residue.
1
Make sure the Chain brake lever is pulled back
into the DISENGAGED position (Fig. 5)
2
Remove the two bar fastening nuts (B). Remove
the cover (Fig. 6).
Important
: When assembling for the first time, the material
fitted to provide protection during transportation
(Fig. 7/Item 24) must be removed first.
3
Using a screwdriver, run the adjustment screw (D)
COUNTERCLOCKWISE until the TANG (E)
(projecting prong) is to the end of its travel toward
the clutch drum and sprocket (Fig. 7).
4
Fit the open end of the chain bar over the die bar
pins (F) (Fig. 8).
Assembly & Parts List
3
1
Chain bar
2
Saw chain
3
Chain tensioning screw
4
Stop claw
5
Chain brake lever/front
hand guard
6
Front handle
7
Starter handle
8
Spark plug (under the
air filter cover)
9
Air filter cover
10 Stop switch
11
Safety lock
12
Oil tank cap
13
Fan housing
14 Fuel tank cap
15
Rear handle/bootstrap
16 Chain guard
17
Choke/(carburetor
setting)
18
Bar fastening nut
19 Throttle lever
20 Chain catch
5
4
6
7