Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 7781
21
Do not remove grass cuttings in the mower casing or on the
cutter by hand or with your feet. Instead use suitable tools such
as a brush or broom.
To ensure that it can collect the grass correctly the grass bag and
in particular the net must be cleaned from the inside after use.
Only attach the grass bag after switching off the motor and the
cutting tool has reached a standstill.
Raise the discharge flap with one hand and, holding the grass
bag by its handle in your other hand, attach it from the top.
Replacing the blade
For safety reasons, we recommend having the blade replaced
by an authorized professional.
Important! Wear work gloves!
Only replace the blade with a genuine Einhell replacement
blade, as this will ensure top performance and safety under
all conditions.
Carry out the following steps to change the blade:
•
Undo the fastening screw (see Fig. 19).
•
Remove the blade and replace with a new one.
•
When fitting the blade, make sure it is installed in the right
direction. The blade’s air vanes must jut into the motor
compartment (see Fig. 19). The dome mounts must be
aligned with the punch holes in the blade (see Fig. 20).
•
Then retighten the fastening screw with the universal
wrench. The tightening torque should be approx. 25 Nm.
At the end of the season, perform a general inspection of
the lawn mower and remove any grass and dirt which may
have accumulated.
At the start of each season, ensure that you check the condition
of the blade.
If repairs are necessary, please contact our customer
service center.
Use only original replacement parts.
GLM1501 User Guide AW.qxd 16/12/08 1:42 pm Page 22
