12
IMPORTANT!
Adjust the cutting height only when the engine is switched off and the
power cable has been disconnected.
Before you begin to mow, check to ensure that the blade is not blunt and
that none of the fasteners are damaged. To prevent any imbalance, replace
blunt and or damaged blades. To carry out this check, first switch off the
motor and pull out the power plug.
The cutting height is adjusted as shown in Figs. 6a and 6b. To do so, turn
the equipment upside down or tilt it to the side. Position both the front
and rear axle in the same notch height, so that the cutting blade runs
parallel to the lawn.
Fig 6a
A
Fig 6b
2
1
3
Position Cutting
depth
1
60
mm
2
42.5
mm
3
25
mm
Assembly and Parts List
3
GB
Ire
MODEL: GLM1437
After SAleS Support
0151 649 1500
1890 946 244
www.einhell.co.uk
