17
16
Features
5
Instructions
6
Operation
The hedge trimmer is equipped with a two-handed safety switch. The machine
works only when the switch on the steady grip (Fig. 4/Item A) is pressed
with one hand and the switch on the handle (Fig. 4/Item B) is pressed with the
other hand.
Releasing either of the switches will bring the hedge trimmer to a stop.
In doing so, please be aware of the movement of the blades.
•
Please check that the blades function correctly. The blades cut on both sides and
run in opposite directions to each other, for guaranteed high cutting performance
and quiet operation.
•
For outside use you must only use extension cables certified for the purpose.
Tips on use
•
The hedge trimmer can be used not only for trimming hedges but for trimming
shrubs and bushes as well.
•
For optimum trimming performance, guide the blade teeth at an angle of approx.
15° to the hedge (see Fig. 5).
•
Since the blades cut on both sides and run in opposite directions to each other,
you can trim in both directions (see Fig. 6).
•
It is recommended to tie a guide line of string along the hedge so that you cut the
hedge to a level height. Cut off all branches which protrude beyond the guide line
(see Figure 7). Ensure that the blades do not come into contact with the string.
•
The sides of the hedge should be trimmed with arc-type movements from the
bottom to the top of the hedge (see Fig. 8).
Technical data
Voltage
230V ~ 50Hz
Power consumption
600 W
Cutting length
460 mm
Protection Class
II
Cutter rail length
510 mm
Tooth spacing
14 mm
max. cutting ø
14 mm
Cuts/min
4200
Sound pressure level LpA
85.5 dB(A)
Sound power level
99 dB(A)
K uncertainty
2.5 dB(A)
Vibration ahv
2.9 m/s
K uncertainty
1.5 m/s
Weight
3.1 kg
Important!
When using the equipment, a few safety precautions must be observed
to avoid injuries and damage. Please read the complete operating
instructions and safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all times. If you give
the equipment to any other person, hand over these operating instructions
and safety regulations as well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow these instructions and
the safety instructions.
L
WA
L
pA
2
2
GB
Ire
MODEL: GLHT 6051
After SAleS Support
0844 801 8701
1890 946 244
www.einhell.co.uk
GB
Ire
MODEL: GLHT 6051
After SAleS Support
0844 801 8701
1890 946 244
www.einhell.co.uk
