Gardenline EA-3198, Руководство пользователя, Страница: 14 / 34

Control Functions
Oscillation angle dial 3 Use this to set the desired angle of the oscillation.
Function control dial 4 Use the function control dial to set one of the functions
listed below:
Oscillation HIGH 5 Oscillation at high heating output
Oscillation LOW 6 Oscillation at low heating output
OFF 9 The device is switched off
LOW 7 Low heating output
HIGH 8 High heating output
Carry handle 10 Use the carry handle to transport the device.
Turning the device on and off
The device 1 features a tilt
protection switch 11 . This switches
the device off automatically as soon as
it tilted or lifted.
Operation continues once the device
has been positioned correctly again.
1. Turn the function control dial 4
so that it points to the desired function option.
The device starts performing the respective function option.
2. To switch the device off, turn the function control dial to the OFF 9
position.
Overheating protection
The device has an overheating protection. This switches the device off
automatically as soon as the device reaches an unsafe level. This is a protective
measure.
1. Disconnect the device from the power supply.
2. Turn the function control dial
4 so that it points to the OFF 9 position.
3. Wait for about 5 minutes until the temperature cools down.
4. Connect the device to the power supply.
5. Switch the device on (see section "Turning the device on and off").
C
11
Operation
14