Step 13: Insert Gas Nozzle into the Gas Inlet
30
20
13
1. Remove the nut from the gas nozzle at the end of the gas hose attached to the
gas control panel
20
.
2. Put the gas nozzle through the hole of the holder of the gas nozzle at the side
burner
30
.
3. Put the nut over the gas nozzle and insert the gas nozzle into the gas inlet of the
side burner.
4. Tighten the nut.
5. Connect the spade connector of the ignition cable attached to the gas control
panel with the side burner.
Assembly instruction
23
