Gardenline BG-PH2250 Скачать руководство пользователя страница 2

®

PLEASE READ ALL INSTRUCTIONS BEFORE USING THE PETROL HEDGE TRIMMER

14

10

11

12

13

15

A

16

5

2

1

3

4

17

1

2

3

4

5

7

8

9

10

11

6

1. Before starting the machine

1.1 Fuel and oil

Recommended fuels

Use only a mixture of normal unleaded petrol and special 2-stroke engine oil. Mix the fuel mixture as indicated 
on the fuel mixing table.

Please note:

 Do not use a fuel mixture which has been kept for longer than 90 days.

Please note:

 Do not use 2-stroke oil with a recommended mixing ration of 100:1. If inadequate lubrication 

causes engine damage, the manufacturer’s engine warranty will be voided.

Please note:

 Only use containers designed and approved for the purpose to transport and store fuel.

Pour the correct quantities of petrol and 2-stroke oil into the mixing bottle (see scale printed on the bottle). 
Then shake the bottle well.

1.2 Fuel mixture table

Mixing procedure: 40 parts petrol to 1 part oil

Petrol

2-stroke oil

1 liters

25 ml

5 liters

125 ml

Содержание BG-PH2250

Страница 1: ... handle 5 Choke lever 6 ON OFF switch 7 Lubrication nipple 8 Gears 9 Fuel pump primer 10 Air filter cover 11 Starter handle 12 Rear handle 13 Throttle lever release 14 Throttle lever 15 Silencer cover 16 Tank for fuel mixture 17 Spark plug boot 18 Spark plug wrench 19 Combined oil petrol cylinder 20 Cutter rail cover 1 11 4 3 2 1 13 6 16 17 5 10 9 14 15 7 8 12 6 7 8 9 2 19 18 3 14 20 6 13 4 5 5 A ...

Страница 2: ...ch has been kept for longer than 90 days Please note Do not use 2 stroke oil with a recommended mixing ration of 100 1 If inadequate lubrication causes engine damage the manufacturer s engine warranty will be voided Please note Only use containers designed and approved for the purpose to transport and store fuel Pour the correct quantities of petrol and 2 stroke oil into the mixing bottle see scal...

Страница 3: ...e than 15 20 minutes 1 Set the machine down on a hard level surface 2 Switch the ON OFF switch to I 3 Hold the machine by the front handle in your right hand and pull the starter cable up to the first resistance point approx 10 cm Then tug sharply on the starter cable The machine should start after 1 2 tugs If the machine does not start after 6 pulls repeat steps 1 7 of the procedure for starting ...

Страница 4: ...led air filter Incorrect carburetor setting Incorrect electrode gap on the spark plug Incorrect carburetor setting Incorrect fuel mix Incorrect carburetor setting Follow the instructions for starting Clean the spark plug or replace it with a new one Contact an authorized customer service outlet Set choke lever to Clean the air filter Contact an authorized customer service outlet Clean the spark pl...

Отзывы: