1300 922 271
5
AFTER SALES SUPPORT
MODEL NUMBER: BG-AW 1136, 04/13
General Safety Regulations
1
Read and follow the operating
instructions and safety information
before using for the first time.
Important!
When using equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read
the complete operating manual with due care. Keep
this manual in a safe place, so that the information is
available at all times. If you give the equipment to any
other person, give them these operating instructions
as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.
CAUTION!
In stagnant water bodies, garden ponds,
swimming ponds and their surrounding areas
the unit may only be used with an earth-
leakage circuit breaker with an actuating
rated current of up to 30 mA (according to
VDE 0100 Part 702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any
kind or other bodies of water in which people
or animals may be present during operation.
It is prohibited to operate the equipment if a
person or animal is in the danger area. Ask
your electrician!
This equipment is not designed to be used by people
(including children) with limited physical, sensory or
mental capacities or those with no experience and/or
knowledge unless they are supervised by a person who
is responsible for their safety or they have received
instructions from such a person in how to use the
equipment safely. Children must always be supervised
in order to ensure that they do not play with the
equipment.
Important!
• Always inspect the equipment visually before using
it. Do not use the equipment if safety devices are
damaged or worn. Never disable safety devices.
• Use the equipment only for the purposes indicated in
these operating instructions.
• You are responsible for safety in the work area
• If the cable or plug is damaged by external
• influences, the cable may not be repaired. The cable
must be replaced by a new one. This work may only
be carried out by a trained electrician.
• The voltage of 230 V alternating voltage specified
on the rating plate must be the same as the mains
voltage.
• Never use the power cable to lift, transport or secure
the equipment.
• Ensure that the electrical plug connections are in
areas that are not at risk of flooding or protect them
from moisture.
• Pull the mains plug before starting any work on the
equipment.
• Do not expose the equipment to a direct jet of water.
• The operator is responsible for complying with local
safety and installation regulations. (Ask an electrician
if you are in any doubt.)
• Consequential damage caused by flooded rooms in
the event of the equipment suffering faults must be
prevented by the user by means of suitable measures
(for example installing alarm systems or a reserve
pump, etc.).
• In the event of a failure please call the customer
service hotline on 1300 922 271.
• The equipment must never run dry or be used when
the intake line is closed fully. The manufacturer’s
warranty does not cover damage caused to the
equipment as a result of running it dry.
• The pump must not be used to operate swimming
pools.
• The equipment must not be installed in the drinking
water pipe line.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions in
a safe place for future use.
Layout (Fig. 1)
2
1. Water intake screw
2. Intake connector
3. Water filler screw
4. Pressure connector
5. Coarse filter
6. Non-return valve
Items supplied
3
• Open the packaging and take out the equipment
with care.
• Remove the packaging material and any packaging
and/or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport
damage.
