Assembling the flower steps
13
5. Carefully move the flower steps to the desired location. Re-check that the
M6 × 12 mm screws
12
and the M6 × 25 mm screws
13
are still securely
tightened.
The flower steps are now ready for use (see
Fig. H
).
Combining sets of flower steps
You can combine several sets of flower steps to form a series of flower steps.
1. Position the sets of flower steps next to each other. Locate the plastic
stoppers
20
in the hook frames (either the hook frame(s) with connection
spikes
1
or the hook frame(s) with connection hinges
2
) and the
short L frames
9
that are next to each other in the individual sets of flower
steps (see
Fig. I
).
2. Remove the plastic stoppers. You may need to use a flat-headed screw-
driver (not included).
3. Align the holes in both sets of flower steps. Manually insert M6 × 38 mm
screws
14
into the aligned holes. Secure the M6 × 38 mm screws with the
M6 nuts
15
(see
Fig. J
).
Note that there will be two M6 × 38 mm screws and two M6 nuts if you have
two sets of flower steps.
4. Check that the position of the flower steps is satisfactory. Tighten the
M6 × 38 mm screws and the M6 nuts with the open-ended wrench
16
or
the ring wrench
17
.
Combining round and straight flower steps
You can combine round flower steps and straight flower steps to create a large
semi-circular set of flower steps, or a large rounded-corner square set of flower
steps or an oval set of flower steps.
− Follow the steps in the chapter, “Combining sets of flower steps” to create
your desired flower steps shape.
Содержание 94227
Страница 4: ...4 A B 3 6 16 17 12 13 14 15 4 5 7 8 9 10 11 1 9 10 C 18 19 1 2...
Страница 5: ...5 F J I E D G H 20 3 6 4 7 5 8 11...
Страница 16: ...16...
