51.7cc 2 Stroke Petrol Backpack Blower
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL: №. EB-500-E • 03/2018 • 60099
(toll free)
AFTER SALES SUPPORT
(toll free)
51.7cc 2 Stroke Petrol Backpack Blower
e-mail: [email protected]
1800 909 909
MODEL: №. EB-500-E • 03/2018 • 60099
26
27
WARNING: Before performing any maintenance on this blower, stop
the engine and disconnect the spark plug (1).
Checking the Spark Plug
Check the spark plug every 10 - 15 hours of use.
1. Remove the black arrestor cover on the spark
plug (1).
2. Use the supplied spark plug spanner (28) to
remove the spark plug (1), by turning it
anti-clockwise (Fig AI).
3. Clean and adjust the spark plug gap to
0.6 - 0.7mm (Fig AJ). Replace any damaged or visibly worn plug with a
Champion RCJ6Y or equivalent spark plug.
4. Install the spark plug (1) finger tight in the cylinder head, then tighten it
firmly with the supplied spark plug spanner (28).
NOTE: If your spark plug becomes worn replacements are available for
purchase, or can be purchased from most hardware stores or mower type
repair shops. Refer to page 32 for further detail.
Air Filter
The air filter (26) should be checked approximately
every 10 hours of use, or more frequently in dusty
areas.
1. Undo the air filter cover (24), by loosening and
turning the air filter locking knobs (25) in clockwise
direction and removing, then remove the air filter
cover (26) (Fig AK).
2. Inspect the air filter (26). If the air filter (26) is
distorted or damaged, replace it with a new one.
3. Wash the air filter (26) in detergent and water.
Rinse the air filter (26) thoroughly. Squeeze out
excess water. Allow it to dry completely before
reinstalling (Fig AL).
4. Re-install the air filter (26) and then replace the
air filter cover (24) and secure the air filter locking
knobs (25) in an anti-clockwise direction.
Replacement air filters can be purchased from
www.powertoolsupport.com or call 1800 909 909.
AL.
AK.
TIGHTEN
LOOSEN
AI.
LOOSEN
Maintenance
