GARDENJACK GHT26C, Инструкция по эксплуатации

Страница: 8 / 25

Hedge Trimmer
Maintenance
Maintenance Hints
·
Only use original replacement parts and original accessories. The use of
unapproved accessories and cutting tools increases the risk of
accidents.
·
Incorrect repair and poor maintenance can shorten the life of the
machine and increase the risk of accidents. Do not perform any
modifications to the machine as this will endanger your safety.
·
The condition of the cutting tool, the protective hood and the
shoulder harness must be checked before starting work. Particular
attention is to be paid to the cutting tool, which must be correctly
sharpened.
·
Turn off the engine and remove the spark plug cap when replacing or
sharpening the cutting tool, and also when cleaning the cutting tool.
·
Never straighten or weld damaged cutting tools.
·
Clean the machine at regular intervals and check all screws and nuts
are well tightened.
·
Never service or store the machine in the vicinity of open flames.
·
When cleaning, servicing and storing the machine, always attach the
cutter blade protection.
Maintenance after each Operation
ATTENTION! Before cleaning, inspecting or maintaining the motor unit, make
sure that the engine has stopped and is cooled down. The engine will heat up
during operation. Do not touch the exhaust system. There is risk of burns!
Before working on the machine (transport, mounting, dismounting, cleaning
and servicing) and if not in use, remove the spark plug cap or disconnect the
gear shaft from the motor unit!
GHT26C
7