01
01
01
01
EPW1800
05
Assembly Instructions
Assembly Instructions
1.
Install the spray wand to the
tri
g
ger gun
Insert the adjustable spray wand (9) into
the trigger gun (10). Push and turn the
adjustable nozzle clockwise onto the
trigger gun (10) until hand tight to lock it
in place. When the pieces are joined
properly, you cannot separate the two
components by pulling straight out on the
adjustable nozzle. All attachments must
be inserted into the gun for proper use.
2.
Join the handle assembly
Insert the two ends of the handle assembly
into the two holes at the top of the base as
shown. Press the hoodle until it is inserted
into the hoodle hole, and the handle is
fixed when you hear a "CLICK" sound.
3.
Attach the high pressure hose
to
the trigger gun
Attach the high pressure hose to the gun.
Insert and quick-connect it tight to avoid
leakage. When the pieces are joined
properly, you cannot separate the two
components by pulling straight out from
the gun. Push the hose lock button, then
you can pull out high pressure hose.
4.
Attach the high pressure hose to
the pressure washer
Attach the hose connector to pressure
washer. Before attaching the connector to
the male fitting, remove the plastic cap,
which is inserted onto the male fitting on
the pressure washer before shipping. This
plastic cap can be discarded once
removed. After both components have
been installed, attach the garden hose
with connector screw on the pressure
washer. Connect the garden hose to the
waterspout.
