Gardenic LB0427-20, Перевод оригинального руководства пользователя

Страница: 31 / 52

31
2.2 Preparation
a) Obtain ear protection and safety glasses. Wear them at all times while
operating the machine.
b) While operating the machine always wear substantial footwear and long
trousers. Do not operate the machine when barefoot or wearing open
sandals. Avoid wearing clothing that is loose fitting or that has hanging
cords or ties.
c) Do not wear loose clothing or jewellery that can be drawn into the air
inlet. Keep long hair away from the air inlets.
d) Operate the machine in a recommended position and only on a firm, level
surface .
e) Do not operate the machine on a paved or gravel surface where ejected
material could cause injury.
f) Before using, always visually inspect to see, that the shredding means,
shredding means bolts and other fasteners are secure, the housing is
undamaged and that guards and screens are in place. Replace worn or
damaged components in sets to preserve balance. Replace damaged or
unreadable labels.
g) Before use, check the supply and extension cord for signs of damage or
aging. If the cord becomes damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY. Do not use the machine if the cord is damaged or worn.
h) Never operate the machine while people, especially children, or pets are
nearby.
2.3 Operation
a) Before starting the machine, make certain that the feeding chamber is
empty.
b) Keep your face and body away from the feed intake opening.
c)
Do not allow hands or any other part of the body or clothing inside the
feeding chamber, discharge chute, or near any moving part.
d) Keep proper balance and footing at all times. Do not overreach. Never
stand at a higher level than the base of the machine when feeding material
into it.
e) Always stand clear of the discharge zone when operating this machine.
f) When feeding material into the machine be extremely careful that pieces
of metal, rocks, bottles, cans or other foreign objects are not included.
g)
If the cutting mechanism strikes any foreign objects or if the machine
should start making any unusual noise or vibration, immediately shut off
the power source and allow the machine to stop.
Disconnect the machine