Gardenia GD103, Руководство пользователя

Страница: 26 / 31

26
Fig. 5
3.1.2 Adjusting the cutting height
CAUTION: It is essential to disconnect the machine to adjust the cutting height.
For a better result, always adapt the cutting height of your mower to the conditions of mowing. If the grass is too
high, it is better to cut two crossings rather than trying to cut at one time once which is at risk of overload the
machine.
In general, cut only half the height of the grass. The cutting height adjustment is done by positioning the handle at
the rear wheel like in fig. 4. It is central height adjustment. This machine has 5 height positions to choose 25mm,
38mm, 51mm, 65 mm, 75mm. Fig 4
Fig. 4
3.2 Operating the mower
Before using, always visually check the presence and correct operation of safety devices. Also check the status of
the cutting blade and its attachment. If necessary, replace or repair the defective parts.
Use only original parts or approved by SELLER. If possible, do not use this machine when the grass is wet.
Preferably mow when the grass is dry. If the grass is wet or is too high, make two crossings: mower the maximum
height firstly to avoid overloading the mower and then the final height. If the grass had accumulated under the deck,
stop the machine and remove the power outlet before clearing the cutting unit.
3.2.1 Starting the mower
- Before starting the machine, refer to the safety of using the electric mower. Make sure the mower is
off before plugging into a socket to avoid accidental start.
-
Connect the electric mower to an appropriate safety approved extension through the cable
hook Fig 5 and 6
-
Make sure the extension cord is long enough for the job. It is recommended to use a brightly
colored cable.
Fig. 6