Phone Orders: 1-800-427-3363 • Customer Service: 1-800-876-5520
e-mail: [email protected] • Web: www.gardeners.com
over please
Step 10.
Slide the Leg Stand over the assembled cart (Figure 8), aligning
the holes in the Leg Stand with the holes in the Bottom and Side
Panels. Insert three 1-3⁄8" Bolts into the holes on each side of the
Leg Stand.
Important:
Alternate from side to side as you tighten each
bolt into its T-Nut. Turn the cart upright to rest on the Wheels and Leg
Stand.
Attaching the Handle
Step 11.
The Handle may be installed in a shorter or longer length.
Choose whichever is most comfortable for you (Figure 9). Note there
are three holes in each side of Handle and four T-Nuts across the top
of each Side Panel.
•
For a longer handle, use the three holes closest to the back of the
cart.
•
For a shorter handle, use the two holes closest to the wheel.
Insert two or three 1-3⁄8" Bolts into the holes on each side of the Handle, depending on handle length and tighten.
Congratulations! You’ve finished the assembly.
Garden Cart Maintenance
• Protect your cart from harsh weather by storing it in a shed, garage, or under a tarp to extend the life of the plywood. Clean out
debris with a broom and allow the cart to dry in sunlight.
• To keep the cart in proper working condition, tighten the nuts and bolts periodically and maintain the tire pressure at 40 psi.
• To extend the life of the plywood, we recommend applying a nontoxic, natural stain, such as Eco-Wood Treatment that will not
contaminate compost, soil or other garden materials you may carry in the cart.
Important Safety Information
• Caution!
Distribute weight evenly when loading the cart. Too much weight in the front of the cart can cause the cart to flip up
unexpectedly and cause injury.
• Use caution on slopes. The cart does not have brakes and may roll away from you.
• Do not exceed the 400-pound load recommendation for this cart.
Figure 9
For a longer handle, attach
the handle using three
1-3/8" Bolts on each side,
as shown below.
For a shorter handle,
attach using two
1-3/8" Bolts on each
side, in the holes
closest to the wheels.
