USER MANUAL FOR GB-R30 (GB-R0) WOOD CHIPPER
1
INTRODUCTION
Thank you for choosing R30 (R0) wood chipper that is designed to give safe and
dependable service if operated according to the instructions.
IMPORTANT HEALTH AND SAFETY INFORMATION
Before using your new chipper, please take time to read this manual. Failure to do so
could result in
：
-personal injury
-equipment damage
-damage to property
-3rd party injuries
This manual covers the operation and maintenance of R30 (R0). All information in
this manual is based on the latest product information available at the time of purchase.
Ensure that all operators are
properly trained
for operating this machine, especially
in
safe working practices.
Our policy of regularly reviewing and improving their products may involve major or
minor changes to the chippers or their accessories. We reserve the right to make
changes at any time without notice and without incurring any obligation.
Due to improvements in design and performance during production there may be, in
some cases, minor discrepancies between the actual chipper and the text in this
manual.
The manual should be considered an important part of the machine and should
remain with it if the machine is resold.
CAUTION or WARNING
BE AWARE OF THIS
SYMBOL
AND WHERE SHOWN,
CAREFULLY FOLLOW THE
INSTRUCTIONS.
THIS SYMBOL INDICATES
IMPORTANT SAFETY
MESSAGES IN THIS
MANUAL.
WHEN YOU SEE THIS
SYMBOL, BE ALERT TO THE
POSSIBILITY OF INJURY TO
YOURSELF OR OTHERS
AND CAREFULLY READ
THE
MESSAGE THAT FOLLOWS.
ALWAYS FOLLOW SAFE
OPERATING AND
MAINTENANCE PRACTICES
SPECIFICATION
Engine type
：
4 stroke OHV
Maximum power
：
7hp
Cooling method
：
Air cooled
Overall weight
：
47kg / 103.62lb
Starting method
：
Recoil
Type of feed
：
Gravity
Maximum diameter material
：
76mm(3 inch)
Fuel & Oil capacity
：
2.8 litres & 0.55 litres
Material processing capacity
：
Up to 800 litres
Fuel type
：
87+ unleaded gasoline (maximum
10% ETHANOL gasoline)
PURPOSE
Designed to chip solid wood material up to 3 inch(76mm) in diameter and capable of
chipping over 0.60 tons of brushwood per hour.