13
GB
12
GB
Cleaning the filter tank
Blocked feed impeller
Connect the power cable to a 230 V AC socket.
A
Caution! Pump will start running immediately!
Avoid dry operation of the pump as dry running will produce
undesirable heat and destroy the pump.
.
Loosen the regulator by turning it anti-clockwise until you
achieve the desired water flow from the vertical pipe of the
fountain / water feature. The narrow, light grey ring makes it
easy to screw on another drawing point (e. g. for a stream).
.
You may connect other terminals to the second outlet.
For example, a separately installed water jet may be operated
via the GARDENA Fountain / Light Bracket, Art. No. 7886.
If necessary fix the light jet base with two screws.
Information:
This significantly reduces the volume of the vertical water jet.
.
If the max. delivery capacity of the second outlet is to be used
then the vertical outlet should be closed with the end cap sup-
plied.
.
Example:
Hose pipe connection with the GARDENA light jet base
We recommend the use of a 3 /4
”
(19 mm) GARDENA pond
hose pipe, Art. No. 7895, connected to with the GARDENA
“Profi” Maxi-Flow-System with Tap Connector (Art. No. 2801
and 2802) and the GARDENA "Profi" Maxi-Flow-System Hose
connectors (Art. No. 2817).
Care instructions
Filter tank and pump should be free from dirt particles!
How to clean :
.
Disconnect the plug!
.
Remove the pump from the water.
.
If necessary remove the gravel.
.
Clean the pump and the filter using a water jet.
.
If there are deposits of dirt inside the pump then dismantle the
casing (
➔
➔
see „Dismantling”) and carefully clean the interior
fittings with water.
Information: Do not use any hard objects or strong detergents!
If the feed impeller becomes blocked, the pump and the filter
should be cleaned (see above).
Starting the pump
Avoid dry operation
Horizontal or
second outlet
Remote control
Pond aeration
Filling the filter tank
with zeolith
Information
➔
Example for application:
For operating water jets from the comfort of your patio or
your living room.
➔
Products:
GARDENA Remote Control Set
Art. No. 7874
GARDENA Remote Control Socket
Art. No. 7875
➔
Example for application:
To aerate the pond.
➔
Product :
GARDENA Pond Aerator
Art. No. 7936
Zeolith fulfils the following functions:
.
Filters the water (
➔
protection for the pump).
.
Bonds with excessive nutrients and causes their decomposition
by bacteria (
➔
Ion exchange and the bonding of e.g. nitrate).
.
Helps to keep the pond clean and maintain the biological
balance.
.
Provides stability for the pump.
GARDENA Zeolith, 1 l
Art. No. 7914
GARDENA Zeolith, 5 l
Art. No. 7915
Note :
To ensure the zeolith functions correctly, we recommend you
replace or clean it every 6 months (e.g. in salt water).
.
Always unplug the pump first before working on it.
.
Before assembling system extensions first unscrew the pre-
assembled cascade and if necessary also the telescopic tube
of the pump and then screw one of the water jets on again
(
➔
the ball-and-socket joint ensures that the water jet is
vertical).
.
Follow the Safety and Assembly Information attached to the
operating instructions.
Operation
1. Remove the pump from the filter basket and screw the regulator
supplied onto the second opening of the pump up to the limit
stop (
➔
max. delivery capacity on the vertical outlet). Then
replace the pump in the filter basket.
2. Put the pump on a stable base to ensure that the upper edge
of the filter tank is completely immersed in water.
Please note the maximum submersion depth (see “Technical Data”).
Installing the pump
Pay attention to
minimum water depth
