13
G
12
G
Adaptable lamps
Light / Fountain Nozzle
Remote control
Pond aeration
Filling the filter tank
with zeolith
Information
➔
Example for application:
Underwater lighting of water jets and pond edges.
➔
Products:
GARDENA Underwater Light
Art. No. 7951
GARDENA
lightline Transformers
➔
Example for application:
For installation in ponds and fountains.
➔
Product:
GARDENA Light / Fountain Nozzle
Art. No. 7953
➔
Example for application:
For operating water jets from the comfort of your patio or
your living room.
➔
Products:
GARDENA Remote Control Set
Art. No. 7874
GARDENA Remote Control Socket
Art. No. 7875
➔
Example for application:
To aerate the pond.
➔
Product :
GARDENA Pond Aerator
Art. No. 7936
Zeolith fulfils the following functions:
.
Filters the water (
➔
protection for the pump).
.
Bonds with excessive nutrients and causes their decomposition
by bacteria (
➔
Ion exchange and the bonding of e.g. nitrate).
.
Helps to keep the pond clean and maintain the biological
balance.
.
Provides stability for the pump
GARDENA Zeolith, 1 l
Art. No. 7914
GARDENA Zeolith, 5 l
Art. No. 7915
Note :
To ensure the zeolith functions correctly, we recommend you
replace or clean it every 6 months (e.g. in salt water).
.
Always unplug the pump first before working on it.
.
Before assembling system extensions first unscrew the pre-
assembled cascade and if necessary also the telescopic tube
of the pump and then screw one of the water jets on again
(
➔
the ball-and-socket joint ensures that the water jet is
vertical).
.
Follow the Safety and Assembly Information attached to the
operating instructions.
Applications:
Examples – System Extensions – Product Recommendations
➔
Example for application:
Water jets may be integrated into water features.
Model
Cascade
Water
Foaming
Water
Water-
Cascade
Bell
Jet Spray Fleur-de-Lis
fall
Rotating
Art.
7814 *
7816
7818
7820
7822
7823
No.
WP 600, 12 V
7850
××
××
××
–
–
–
WP 1200, 12 V
7856
××
××
××
××
××
××
* contained in delivery volume
Check line voltage. Data indicated on the type plate must match
technical data of the mains supply.
The pump must not be operated when there are people in the
water.
Swimming pools and garden ponds should be designed accord-
ing to international and national design regulations. Please
consult a professional electrician.
Do not use the power cable to carry the pump or to pull the plug
out of the socket. Protect the power cable from heat, oil and
sharp edges.
Please unplug the pump after operation and before carrying out
any maintenance works.
The temperature of the liquid used must not be below 4 °C or
above 35 °C.
Sand and other abrasive substances in the liquid cause in-
creased wear and reduce the output of the pump.
GARDENA pumps and plug connections have been designed
exclusively for the use with 12 V low voltage. When connected
to 230 V your life is at risk! Operate the pump only with the
delivered transformer.
Do not expose the transformer to direct sunlight.
Ensure that the transformer is positioned in a place safe from
flooding and at least 2 m away from the edge of the pond.
Please observe the local noise prevention regulations.
Check line voltage
Do not operate pump
when there are people
in the water
Swimming pools
and garden ponds
Do not use power cable
to carry the pump
Disconnect plug
Temperature of the liquid
used
Wear and reduced
output
Caution !
12 V low voltage
Do not expose the
transformer to sunlight
To place the transformer
Observe local noise
prevention regulations
Water jets for
26,5 mm (G 3 /4) thread
connections
