9
GB
1. Setting the watering program on the programming card
8
:
Push the timer slide to the actual time of day
(e.g.:
12 o’clock
).
Push starting time slide to the starting time required
(e.g.:
6 o’clock
).
Push watering time slide to the length of time required.
(e.g.:
15 minutes
).
Push cycle slide to the cycle required
(e.g.:
24 hours
= every day).
2. Insert programming card
8
in the card slot of the Water Timer.
3. Press
red button
briefly.
The green LED flashes for 10 seconds.
4. Remove programming card
8
at a constant speed whilst
keeping it straight (while the green LED flashes).
The green LED goes on for 5 seconds and the program has
been transferred.
If the green LED flashes at 10 second intervals, the Watering
Timer has been programmed and the program is active.
8
