(5)
(7)
(6)
(1)
3. Insert the batteries
(6)
into the battery compartment
(7)
.
Make sure that the polarity is correct.
The LED
(1)
flashes green.
(5)
(6)
(4)
4. Push the battery compartment cover
(5)
back onto the battery
compartment
(6)
.
5. Slide the lid
(4)
back onto the sensor.
The inclusion mode has been activated.
6. Make sure that the Connection LED flashes green before
continuing.
7. Follow the instructions in the GARDENA smart App.
If inclusion has failed (no green LED), push the battery compartment cover
(5)
for approx. 10 seconds to reset the sensor.
8
EN
