Problem
Possible Cause
Remedy
Unit no longer cuts
Cutting filament worn or
too short.
v
Extend the cutting filament
(see 3. OPERATION
“To extend the cutting filament
(Tip mechanism)”).
Filament cassette empty.
v
Replace the filament cassette
(see 4. MAINTENANCE
“To replace the filament
cassette”).
Cutting filament pulled into the
cassette or stuck together.
v
Pull the cutting filament out
of the filament cassette
(see above).
Cutting filament cannot be
extended or cutting filament is
used quickly
The cutting filament became
too dry and brittle (e. g. during the
winter).
v
Place the filament cassette in
water for approx. 10 hours.
The cutting filament frequently
touched hard objects.
v
Prevent the cutting filament
from touching hard objects.
For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.
7. TECHNICAL DATA
Turbotrimmer
SmallCut 300/23
(Art. 9805)
SmallCut Plus 350/23
(Art. 9806)
Motor power consumption
300 W
350 W
Mains voltage / Mains frequency 230 V / 50 Hz
230 V / 50 Hz
Cutting filament thickness
1,6 mm
1,6 mm
Cutting width
230 mm
230 mm
Cutting filament supply
6 m
6 m
Cutting filament feed
Tip mechanism
Tip mechanism
Rpm of filament cassette
13,000 rpm
13,000 rpm
Weight
1.6 kg
1.8 kg
Sound pressure level L
pa
1)
Uncertainty k
pa
83 dB (A)
3 dB (A)
83 dB (A)
3 dB (A)
Sound power level L
WA
2)
Uncertainty k
WA
measured 92 dB (A) /
guaranteed 94 dB (A)
2.04 dB (A)
measured 92 dB (A) /
guaranteed 94 dB (A)
2.32 dB (A)
Hand / arm vibration a
vhw
1)
Uncertainty k
a
4.3 m/s
2
2.2 m/s²
4.3 m/s
2
2.2 m/s²
Measuring process complying with
1)
EN 50636-2-91
2)
RL 2000/14/EC
The stated vibration emission value has been measured according to a standardized
test procedure and can be used for comparison of one electric power tool with
another. It can also be used for preliminary evaluation of exposure. The vibration
emission value can vary during actual use of the electric power tool.
9
GB