background image

WWW.GARDENA.COM

5. Starting and stopping 

See chapter 4.4 and 4.5 in the Operator’s Manual

 

 Starting

1.  Open the cover by pressing the 

STOP

 button.

2.  Set the main switch to position 

1

. When you do this for the first time, a start up sequence starts 

where you select a four digit PIN code among other things.

3.  Press the 

START

 button.

4.  Close the cover.

 Stopping

 

Press the 

STOP

 button.

The right to make changes without prior notice is reserved. 
Copyright © 2016 GARDENA Manufacturing GmbH. All rights reserved.
www.gardena.com

6. Adjust the robotic lawnmower to suit 

your garden

See chapter 6.3, 6.5, 6.7 and 6.8 in the Operator’s Manual

Here you will find some tips on important settings for your robotic lawnmower. 
All settings for your robotic lawnmower are made via the menu functions. 

Adjust the mower to suit the size of your lawn

The mowing results depend on mowing time. Adjust the mowing time to suit your 
garden using the 

Timer

 function. If the mower cuts too often, the lawn will appear 

trampled down. If the mower cuts too seldom, the lawn will not be properly mown.

Test run the mower through narrow passages

Narrow passages in the garden make it difficult for the mower to find the charging station. Use the 

Test

 function to 

test that the mower can travel through the narrowest passage.

1.  Place the mower in the charging station.
2.  Select 

Test

 in the robotic lawnmower’s menu (Lawn coverage > Area X > More > Test) and press OK. Then 

press the 

Start

 button and close the cover.

3.  Check that the mower follows the guide wire through the passage.
  a.   If the mower travels through the passage, the test is complete.
 b.  If the robotic lawnmower does not get through the passage: Check that the guide wire has been laid ac-

cording to the instructions in chapter 3.6 in the Operator’s Manual.

It is also possible to adjust the corridor width for the guide wire. See chapter 6.7 in the Operator’s Manual. 

Timer

You decide what times during the day and days of the week the mower is to work. 
When setting the timer, calculate that the robotic lawnmower mows about the 
listed amount of the number of square meters per hour and day listed in table Work 
capacity. 

115 84 40-26

Table Work capacity 
Model

About m

2

 per hour and day

GARDENA R100Li / R100LiC

59

GARDENA R130Li / R130LiC

68

GARDENA R160Li / R160LiC

70

3

1

3

Отзывы: