15
5.3 Working position
(Fig. C)
Just hold unit at the handle (5) and
push Grass Shears RS 10 / RL 10
along on its sled for grass edges
and lawn surfaces. The Grass Cutter
RL 20 is equipped with wheels (8)
and an additional guide handle (9)
enabling ease of use.
5.4 Cutting lawn edges and
difficult areas
(Fig. D)
For a vertical cut hold the Grass
Shears RL 10 with both hands and
turn the unit into cutting position.
The additional guide handle on the
Grass Cutter RL 20 ensures safe
handling and pushing especially
for a lateral cut.
Adjustment of the guide handle
for RL 20
(Fig. A / C)
The guide handle can be adjusted
by releasing the adjustment knob
(10), and tightening, when the
desired position is achieved.
5.5 Cutting Grass against walls,
trees and fences
(Fig. E)
Slide the Grass Shears / Grass
Cutter with the outer side of the
cutting blade along hard objects
and surfaces.
6. Maintenance / Service / Storage
The GARDENA Grass Shears
and Grass Cutter are largely main-
tenance-free.
Please make sure that the con-
tacts of the attachment part (1)
and of the Accu (11) are always
clean.
Grass and dirt should be removed
with a dry rag or brush.
The Grass Shears / Grass Cutter
should be cleaned thoroughly
before and after use, and the cutting
blades lubricated with a biodegrad-
able oil. This improves the cutting
performance.
Never grease cutting
blades!
Repairs may only be performed
by GARDENA Service Centres
or by dealers authorised by
GARDENA.
A
Attention! Always remove
the Accu before working on
the Grass Shears / Grass Cutter.
Risk of injury!
Due to risk of injury to persons
and / or product damage, do not
clean the Grass Shears / Grass
Cutter under running water,
especially under high pressure.
Store the Grass Shears / Grass
Cutter in a dry, frost-free place.
Keep out of the reach of children.
Always cover the blades with the
protective sheath (7) for storage.
Observe the manufacturer’s
installation hints when exchang-
ing the cutting blades.
Exchanging the cutting blades
Only use the original GARDENA
Spare Blades, Art. No. 2346.
These blades can be obtained at
your GARDENA dealer or directly
from the GARDENA service centre.
Never use spare parts and ac-
cessories which have not be
designed by the manufacturer.
