3. Connect the battery charger
(C)
into a mains socket.
4. Slide the battery charger
(C)
onto the battery
(B)
.
When the battery charge indicator
(Lc)
at the charger flashes green
the battery is being charged.
When the battery charge indicator
(Lc)
at the charger illuminates
permanently green the battery is completely charged
(Charging time, see 7. TECHNICAL DATA).
5. Examine the charge status regularly while you charge.
6. When the battery
(B)
is completely charged, you can disconnect the
battery
(B)
from the charger
(C)
.
Meaning of the indication elements:
Indication on the charger [ Fig. O3 ]:
Flashing of the battery
charge Indicator
(Lc)
The charging procedure is indicated by
flashing
of the battery charge
indicator
(Lc)
.
Note:
The charging procedure is only possible when the battery
temperature is within the allowable charging temperature range,
see 7. TECHNICAL DATA.
Continuous lighting
of the battery
charge indicator
(Lc)
Continuous lighting
of the battery charge indicator
(Lc)
indicates that
the battery is fully charged
or
that the temperature of the battery is
not within the allowable charging temperature range and can therefore
not be charged.
When the battery is not inserted,
continuous lighting
of the battery
charge indicator
(Lc)
indicates that the mains plug is inserted in the
socket outlet and that the battery charger is ready for operation.
Battery charge status indication
(P)
on the product [ Fig. O4 / O8 ]:
After starting the product, the battery charge status indication
(P)
is displayed for 5 seconds.
Battery charge status
Battery charge status indication
67 – 100 % charged
(L1)
,
(L2)
and
(L3)
illuminate green
34 – 66 % charged
(L1)
and
(L2)
illuminate green
11 – 33 % charged
(L1)
illuminates green
0 – 10 % charged
(L1)
flashes green
If the LED
(L1)
flashes green, the battery must be charged.
If the error LED
(Wp)
is illuminated or flashing, see 6. TROUBLESHOOTING.
Work positions:
The product is provided with a safety device to prevent it from
being switched on in the position at working interruption and
transport position.
Working position
(W)
approx. 22° – 70° [ Fig. O5 ]:
In order for the mower to be started, the tube
(1)
must be in the
working position
(W)
(approx. 22° – 70°).
For safety reasons, the mower stops automatically when the tube
(1)
is
moved out of the working position
(W)
.
Parking position
(P)
approx. 70° – 105° [ Fig. O5 / O6 ]:
When the tube
(1)
is completely up, the tube
(1)
is in the parking
position
(P)
. The mower cannot be started in this position.
Transport position
(T)
approx. 0° – 22° [ Fig. O5 / O7 ]:
For transport, the mower can be carried by the tube
(1)
or by the
handle
(5)
.
When the mower is carried, the handle
(1)
is in the transport position
(T)
.
The mower cannot be started in this position.
To adjust the cutting height [ Fig. O8 ]:
The cutting height can be adjusted from 30 – 50 mm in 3 positions.
1. Push the height adjustment
(11)
in the direction of the wheel and set
the height adjustment
(11)
to the desired position.
2. Let the height adjustment
(11)
engage in the desired position.
To start the mower [ Fig. O1 /O9 ]:
DANGER! Risk of injury!
Risk of injury if the product does not stop when you
release the start lever.
v
Do not bypass the safety devices or switches. For example
do not attach the start lever to the handle.
To start:
The product is provided with a two-switch safety device (safety
key with starting lockout) to prevent the product from being turned
on by accident.
1. Open the lid
(4)
.
2. Put the battery
(B)
into the battery holder
(D)
until it audibly engages.
3. Put the safety key
(6)
into the handle and turn it to position .
4. Push the starting lockout
(7)
with one hand and pull the start lever
(8)
with the other hand.
The mower starts and the battery charge status indication
(P)
is
displayed for 5 seconds.
5. Release the starting lockout
(7)
.
To stop:
1. Release the start lever
(8)
.
The mower stops.
2. Turn the safety key
(6)
to position and remove it.
Tips to use the mower:
To produce a well-maintained lawn and optimise the cutting performance,
we recommend to cut the lawn regularly once a week if possible. The lawn
becomes denser if you cut it frequently.
After relatively long cutting intervals (holiday lawn), first of all cut in one
direction with the highest cutting height and then cut in the crosswise
direction with the required cutting height.
If possible, only cut the grass when it is dry, if the grass is damp, the
cutting pattern will be uneven.
Cutting performance and battery charge:
The lawn area which can be cut on each battery charge depends on
several factors such as moisture, grass density and cutting height.
In order to ensure an optimal use of space, do not turn the mower on
and off too frequently as this severely reduces the battery running time.
The cutting performance for each battery charge can be ideally utilised
by increasing the cutting height and frequent mowing.
Mulching:
The specially shaped blade ensures optimum cutting and mulching results.
The blades of grass are not simply cut off, but cut into small particles
which fall onto the ground between the blades of grass, thus reducing
the drying out of the lawn. Grass cuttings do not have to be collected
or disposed of and are a natural fertiliser.
The best mulching result is achieved when 1/3 of the grass height is cut
(e. g. from 60 mm to 40 mm).
The maximum area of 50 m² can only be achieved with optimum conditions.
4. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v
Wait for the blade to stop, remove the safety key and use
gloves before you maintain the product.
To clean the mower:
DANGER! Risk of injury!
Risk of injury and risk of damage to the product.
v
Do not clean the product with water or with a water jet
(in particular high-pressure water jet).
v
Do not clean with chemicals including petrol or solvents.
Some can destroy critical plastic parts.
To clean the underside of the mower [ Fig. M1 ]:
The underside is easiest to clean after you mowed.
1. Lay the mower on its side carefully.
2. Clean the underside and the blade
(9)
with a brush and the enclosed
scraper
(10)
(do not use sharp objects).
To clean the overside of the mower:
v
Clean the overside with a damp cloth.
To clean the battery and the battery charger:
Make sure that the surface and the contacts of the battery and the battery
charger always are clean and dry before you connect the battery charger.
Do not use running water.
v
Battery charger: Clean the contacts and the plastic parts with a soft
and dry cloth.
v
Battery: Occasionally clean the ventilation slots and the terminals on
the battery using a soft brush that is clean and dry.
6
EN
