A non-functioning battery must be disposed
of correctly. It may not be sent via post.
For further details, please contact your local
disposal companies.
The charging cable should be checked regularly
for signs of damage or ageing (brittleness) and
may only be used if it is in perfect condition.
The charger unit provided may only be used to
charge the rechargeable batteries supplied with
the Turbotrimmer.
Non-rechargeable batteries must not be charged
with this battery charger (danger of fire).
The Trimmer must not be operated during
charging.
Only charge battery between 0 – 45 °C.
After heavy duty service allow battery to cool
down first.
Only the original GARDENA battery may be used.
Storage
The trimmer must not be stored over 35 °C or
under direct exposure to sunlight.
Do not store the trimmer in places with static
electricity.
3. Assembly
Assembling the trimmer:
ß
R
h
j
g
t
2
1
w
e
o
ö
3
0
l
k
CAUTION!
The handle may only be assembled if the cable
between the handle and the shaft is in a perfect
condition. The handle may not be assembled if
the cable is damaged. Contact GARDENA customer
service in such a case.
CAUTION!
The trimmer may only be operated provided that the
protective cover
q
is assembled.
1. Carefully remove the handle
1
together with the shaft
2
from
the packaging. In doing so, no stress may be exerted upon the
cable.
2. Ensure that the threaded collar
t
is in an open position
(padlock symbol open).
3. Slide the handle
1
onto the shaft
2
until it audibly engages.
In doing so, the cable may not become twisted or jammed.
4. By pulling on the handle
1
, check whether it is firmly fixed to
the shaft
2
. Once assembled, the handle
1
and shaft
2
cannot
be separated.
5. Close the threaded collar
t
(padlock symbol closed).
6. Pull the lock
o
belonging to the additional handle
h
, push in
both of the snap-fits
g
belonging to the additional handle
h
and, with the grooves
ß
R
pointing forwards, snap them into the
holder
j
.
7.
Only for art. 9825:
Place both halves of the impeller
k
around
the lower groove
l
of the trimmer head
3
and close until they
audibly engage.
8. From the front, push the plant guard
ö
into the upper
groove
0
of the trimmer head
3
. In doing so, ensure that
the impeller
k
can rotate freely (i.e. insert the bow with
the kink pointing upwards).
14
GB
