3. Assembly
Assembling the trimmer:
1
ß
R
2
4
3
7
8
9
6
5
CAUTION!
The trimmer may only be operated provided that the
protective cover
0
is assembled.
1. Pull the lock
1
belonging to the
additional handle
2
, push in both
of the snap-fits
3
belonging to the
additional handle
2
and, with the
grooves
ß
R
pointing forwards, snap
them into the holder
4
.
2. Place both halves of the impeller
5
around the lower groove
6
of the
trimmer head
7
and close until
they audibly engage.
3. From the front, push the plant
guard
8
into the upper groove
9
of the trimmer head
7
. In doing
so, ensure that the installed bow
can rotate freely (i. e. insert the
bow with the kink pointing
upwards).
4. Place the protective cover
0
on
top of the trimmer head
7
.
5. Turn the protective cover
0
until it
can be pushed over the trimmer
head entirely (the two arrows
ß
A1
,
ß
A2
are directly across from each
other).
6. Rotate the protective cover
0
anti-
clockwise until it audibly engages.
0
A1
ß
ß
A2
Supply lines must be lighter than:
– common rubber lines (H 05 RNF),
if rubber-insulated;
– common PVC-coated lines (H 05 WF),
if insulated with PVC.
Only connect the device to a mains circuit which
is equipped with a residual current device (RCD)
with a maximum release current of 30 mA.
In Switzerland the use of a residual-current
device is obligatory.
Warning! This machine produces an electro-
magnetical field during operation. This field may
under some circumstances interfere with active
or passive medical implants. To reduce the risk
of serious or fatal injury, we recommend persons
with medical implants to consult their physician
and the medical implant manu facturer before
operating this machine. Do not use the product
when a thunderstorm is approaching.
14
GB