3. Examine the charge status regularly while you charge.
4. When the battery is completely charged, disconnect the
battery charger cable
(E)
from the charging socket
;
.
5. Disconnect the charging power supply
(C)
from the
mains.
Battery charging indicator [ Fig. O2 ]:
Battery charging indicator during charging:
100 % charged
(L1)
,
(L2)
and
(L3)
illuminate (for 60 sec.)
66 – 99 % charged
(L1)
and
(L2)
illuminate,
(L3)
flashing
33 – 65 % charged
(L1)
illuminates,
(L2)
flashes
0 – 32 % charged
(L1)
flashes
Battery charging indicator during operation
(for 5 sec.):
66 – 99 % charged
(L1)
,
(L2)
and
(L3)
illuminate
33 – 65 % charged
(L1)
and
(L2)
illuminate
11 – 32 % charged
(L1)
illuminates
0 – 10 % charged
(L1)
flashes
To adjust the handle (only for ComfortCut Li) [ Fig. O3]:
The handle can be adjusted in 5 steps to suit individual
requirements.
v
Push the elbow joint
(1)
on both sides and adjust the
handle
(2)
to the desired angle.
To change the blade [ Fig. O4 ]:
Only the GARDENA blade may be used:
– GARDENA Grass and Boxwood blade Art. 9862
– GARDENA Shrub blade Art. 9863
1. Press the lock buttons
(3)
on both sides at the same time
and remove the blade
(4)
.
2. Place the other blade
(4)
.
To start the battery shear:
DANGER! Risk of injury!
Risk of injury if the product does not stop
when you release the start lever.
v
Do not bypass the safety devices or switches.
For example do not attach the start lever to the
handle.
To start:
The product is provided with a safety device (start
lever with starting lockout) to prevent the product
from being turned on by accident.
Without telescopic handle [ Fig. O5 ]:
1. Remove the protective cover from the blade.
2. Hold the handle
(2)
, push the starting lockout
(5)
forward
and pull the start lever
(6)
.
The battery shear starts.
3. Release the starting lockout
(5)
again.
With telescopic handle [ Fig. O6 ]:
When the telescopic handle is assembled, the
starting lockout
(5)
and the start lever
(6)
on the
battery shear are without function.
1. Assemble the telescopic handle.
2. Remove the protective cover from the blade.
28
EN
9853-20.960.01 A6 Short.indb 28
06.08.18 13:37
