15
GB
WARNING !
Risk of Injury !
8. Troubleshooting
Blades can cause serious injury.
v
v
Do not push the safety lock of the Accu-shears forwards
when rectifying faults.
If the Accu Shears do not cut cleanly even after thorough cleaning,
the cutting blades are defective and must be replaced with new
ones.
Please only use original GARDENA Accu Shears Cutting
Blades :
Lawn shears blade set
Accu 60 / 75 Art. No. 2345
with blade protection
Accu 90
Art. No. 2346
Shrub shears blade set
Accu 75 / 90 Art. No. 5378
with blade protection
1. Remove the wheels (see “3. Assembly” ).
2. Press both catches
E
simultaneously and push the runner
F
all the way forwards.
3. Open the runner
F
and remove the blade set
G
.
4. Clean the area around the gears and coat the gear wheels with
acid-free grease (Vaseline).
5. Insert the blade set
G
and close the runner
F
.
6. Push the runner
F
all the way back until both catches
E
engage again.
Risk of short circuit, Risk of fire.
v
v
The contacts of the accu must not touch metallic parts.
1. Loosen screw
I
.
2. Remove cover
J
.
3. Remove accus
K
.
4. Pull cable receptacles
L
off accu pack.
5. Install new accus in reverse order.
With all other malfunctions, please contact one of the GARDENA
service centres or a dealer authorised by GARDENA.
Repairs must only be performed by specialists authorised by
GARDENA.
Replacing the Cutting
Blades :
Changing the Accus :
E
F
E
I
J
K
L
D
D
G
H
F
